The shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. In reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a S-shape profile. Th...

The shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. In reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a S-shape profile. The pr...

the shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. in reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a s-shape profile. the pr...

in this study, changes in speed and turbulence intensity in the wake of a peugeot model and the drag coefficient changes with increases vehicle speed in unsteady flow measured and evaluated. the blow open circuit wind tunnel to simulate fluid flow is used. disturbances and nominal maximum speed of the device, respectively is, 30 m / s and 0.01%. has been continuously increasing speed by an inve...

The instability of supersonic mixing layers, with velocity profiles possessing a wake component, is investigated using linear, inviscid, spatial theory. The mean-velocity profile is represented by a hyperbolic-tangent profile plus a wake component. Such profiles are encountered in the initial region of experimental supersonic shear-layer lIows, as well as in envisaged hypersonic propulsion syst...

Individual pitch control (IPC) for wind turbine load reduction in Region 3 operation is improved when wake interaction is considered. The Larsen wake model is applied for composing the rotor wind profile for downstream turbines under wake interaction. The wind profile of the turbine wake was generated by modifying the NREL’s TurbSim codes. The state-space models of wind turbine were obtained vi...

The wind farm layout program FLaP (Farm Layout Program) estimates the wind speed at any point in a wind farm and the power output of the turbines. The ambient flow conditions and the properties of the turbines and the farm are used as input. The core of the program is an axis-symmetric wake model, describing the wake behind one rotor. Here an approach based on the simplified Reynolds equation w...

in this study, the characteristics of the wake around a rotating circular cylinder have been investigated experimentally. to this end, a cylinder with a circular cross-section of plexiglas with the length of 400 mm and a diameter of 20 mm have been tested in the wind tunnel. using existing methods, the characteristics of the wake and the drag coefficients of the model in different cases have be...

Generation of wake fields by a short electromagnetic pulse in a plasma with an inhomogeneous background magnetic field and density profile is considered, and a wave equation is derived. Transmission and reflection coefficients are calculated in a medium with sharp discontinuities. Particular attention is focused on examples where the longitudinal part of the electromagnetic field is amplified f...

Direct numerical simulation is used to simulate the turbulent wake behind an accelerating axisymmetric self-propelled body in a stratified fluid. Acceleration is modelled by adding a velocity profile corresponding to net thrust to a self-propelled velocity profile resulting in a wake with excess momentum. The effect of a small to moderate amount of excess momentum on the initially momentumless ...